A miter saw allows you to cut a wide array of angles that can be used for a variety of things. Some use a miter saw for projects that includes but are not limited to door frames or window casings. A skilled person can make accurate cuts on any angle and with a high degree of precision. On the other hand, if one has not mastered the necessary skills needed to use a miter saw, you can end up wasting a lot of lumber. That’s why it is good to master the skill of measuring before proceeding to cut. To help you out, here are 5 things to know about measuring before you use a miter saw.



Mark the wood properly
Whether you are measuring your timber with a ruler or a tape measure, it is important that you mark the angles you have measured before cutting. One of the best ways to mark your angles is by using a pencil. A pencil highlights the areas where you will drive the saw through, once you start cutting. However, for angles that require a high degree of accuracy, you should consider measuring using a razor blade to do your marking since it will give you a more accurate line.

Know where to cut
You can mark your wood correctly and still get an inaccurate angle. To ensure that you cut your angles with precision, always keep the following in mind. When marking your wood using a pencil, always cut outside the marking. This helps reduce wastage. That’s because, if you notice a mistake after cutting, you still have the leeway to make cuts deeper inside. You don’t have the same leeway if you cut inside of the pencil marking. The same applies to razor markings, though due to the more precise nature of these markings, you can make pretty good cuts along the line. 

Understand the type of cuts you want to make
The accuracy of cuts you make is premised on your understanding of the different types of cuts For instance, the markings for a crosscut are different from those of a rip cut. Similarly, those for a curved cut differ significantly from those of a miter cut. Once you master each of these cuts, then even the process of making cuts gets easier and more precise. 

Practice on a reject piece of wood
For most experienced wood professionals, measuring and cutting are pretty easy to pull off. However, if you are yet to master the skill, practice a cut on an offcut piece of timber, and if you feel confident enough, actualize the same on the piece you are working with for the job.

Use a quality saw for the job
Up to this point, you understand how to measure, right? Well, now the next step is to cut the angle you desire. To achieve your angle to precision, you need to invest in a good miter saw. This is information you can easily get from woodwork reviews. One of the best reviews you can use is Miter Saw Judge. They have detailed reviews that will help you buy the best saw for accurate miter cuts.